Acer Aspire E5-575 Motherboard (DAZAAMB16E0 / Quanta ZAA) Schematics, Boardview & BIOS Bin

Motherboard Specifications

The DAZAAMB16E0 (Quanta ZAA-x16 / Ironman-SK / Captain-SK) is a 6-layer laptop motherboard designed for the Acer Aspire E5-575 series. This board typically features 6th and 7th Generation Intel Core processors (Skylake / Kaby Lake) with DDR4 RAM support and integrated or discrete GPU configurations.

Board Model: DAZAAMB16E0 (Quanta ZAA-x16 / ZAAA)
Supported Models: Acer Aspire E5-575, E5-575G, F5-573G
PCB Revision: 2016-0203-C-Gerber
Platform: Intel Skylake-U / Kaby Lake-U

Common Chip-Level Faults & Repair Notes

When troubleshooting a dead or no-power Acer Aspire E5-575 (DAZAAMB16E0 board), check the following common failure points:

No Power / Shorted Input: Check the main 19V rail MOSFETs near the DC jack input for short circuits to ground.
3V/5V Standby IC: Verify the standby controller IC outputs before pressing the power button.
No Display / Cap Lock Light Solid: Often resolved by reprogramming the Main BIOS + EC BIN file using an SPI programmer (e.g., RT809F, CH341A).
Charging Issues: Inspect the Charging IC and replace it if the battery is not charging despite a healthy battery pack.

Free Download Section

1. Acer Aspire E5-575 Schematic Diagram (.PDF)

Download the full 6-layer schematic diagram to trace power lines, signals, and IC pinouts.

Schematics Download Free

2. Acer Aspire E5-575 Boardview File (.BRD / .CAD)

Use BoardViewer software to locate component labels, resistors, and test points on the DAZAAMB16E0 PCB layout.

Board View Download Free

If you don't have BoardView Software, you can download it here: Board Viewer Software Free Download

3. Acer Aspire E5-575 Clean BIOS + EC Bin File

Working 8MB / 16MB SPI Flash dump for solving black screen, fan full-speed, and power-on loop issues.

Always remember: First Backup your old BIOS chip and save it (to USB or Hard drive) before flashing the new bin file. This is a crucial step to ensure you can revert if needed.