Showing posts with label LA-4891P. Show all posts
Showing posts with label LA-4891P. Show all posts

Wednesday, November 18, 2026

Acer Aspire 5739G (Compal LA-4891P) Schematic & Boardview Download + Chip-Level Diagnostic Guide

The Acer Aspire 5739G is a classic multimedia powerhouse from the late Core 2 Duo era, built upon the robust Compal LA-4891P (ZK2) motherboard architecture. This specific model is unique for its modular MXM-III graphics slot and the Intel PM45 chipset. For chip-level technicians, the LA-4891P presents a traditional Compal power sequence, making it an excellent board for mastering voltage rail transitions from ALW (Always-on) to VS (Switched) states. In this guide, we provide the full engineering schematic and boardview, along with professional diagnostic notes for common faults found in this generation.

Board Architecture & Technical Specifications

Component Details / Part Number
Motherboard Model / ODM Part Number Compal LA-4891P (ZK2)
Target Laptop Series / Form Factor Acer Aspire 5739 / 5739G Series
Chipset / CPU Architecture Intel Penryn (Core 2 Duo) + PM45 + ICH9M
Super I/O (EC/KBC) Controller ENE KB926QF-D3
Key Voltage Rails & Switching Coils PL4 (+3VALW), PL5 (+5VALW), PL8 (+1.5V_DDR3), PL10 (+VCC_CORE)

Real-World Motherboard Diagnostic Procedures

1. Input Power Stage & DC-IN Protection Circuit

The LA-4891P utilizes an ISL6251 (PU1) as the primary charging IC. If the laptop is completely dead with no 19V rail across the board, start by measuring PR1 (the main current sense resistor). If 19V is missing here, check the gate voltage of the two P-channel entry MOSFETs, PQ1 and PQ2. The PACIN signal must be high (approx. 3.3V) to pull the gates low via the transistor logic, allowing the adapter voltage to pass. If ACOK is missing from the ISL6251, the EC (KB926) will never initialize the power-on sequence.

2. Standby Rail Generation & LDO Norms

The 3.3V and 5V Always-on rails are generated by PU4 (ISL6236). Before checking the switching outputs at PL4 and PL5, verify the LDO outputs: pin 7 (LDO5) and pin 4 (VREF). If PL4 (+3VALW) shows a short to ground (less than 50 ohms), it is often the ENE KB926 Super I/O or the ICH9M Southbridge. In this era of Acer laptops, the NEC/TOKIN capacitor (if present under the CPU) or the equivalent tantalum array can degrade, causing ripple on the +VCC_CORE rail, leading to random shutdowns or "Blue Screen" errors under load.

3. Power-On Sequence & Signal State Tracking

For "No Display" symptoms on the 5739G, focus on the MXM-III Graphics Card. Since the PM45 chipset lacks integrated graphics, the system relies entirely on the discrete GPU. Verify +VGA_CORE at the MXM slot pins. If the system starts but has no display, check the RSMRST# signal at pin 100 of the KBC; it should jump from 0V to 3.3V when the power button is pressed. If PM_SLP_S3# and PM_SLP_S4# are released by the Southbridge but the board still fails to initialize, a corrupted BIOS or a failing ICH9M chipset is a likely culprit.

Download Schematic & Boardview Files

⏳ Please wait 120 seconds to unlock your Schematic & Boardview Files download...
🔎 Read the chip-level diagnostic notes above while you wait.

Professional Repair Assistance

Explore our technician resources:

Translate

AdBlock Detected!

Please support Genius Mind Technologies by disabling your AdBlocker. We rely on ads to keep our massive library of free schematics, boardviews, and BIOS bin files free for everyone.